HoistSense

  • Increase your profitability

    HoistSense is an advanced electronic system that constantly keeps track of usage, load and critical incidents; while using these information to the advantage of the user to further increase the efficiency and decrease the downtime of the hoist. 

    Stored Parameters

    • Remaining Safe Working Period (SWP) of the hoist
    • Current load on the hook
    • Total number of overload incidents
    • Total running time of the hoisting motor
    • Mean load
    • Load Spectrum ( Light, Medium, Heavy, Very Heavy )
    • Total number of starts
    • Time to next maintenance ( depending on the usage – Dynamic )
    • Duty

    Functions
    • Weighing and Informative Display
    • Overload Limiter
    • Faster speeds depending on the load
    • Dynamic Service Timer
  • Photos

     

    Display

     

Features:

  • Real-Time Monitoring
    • Permanent SWP ( Safe Working Period ) calculation.
    • Up-to-date information about the remaining duration of service.
    • Comply with the Regulations.
  • Increased Efficiency
    • With UltraSpeed function enabled, HoistSense increases speed to 150% nominal speed on all motions when the load is below 15% of the SWL ( Safe Working Load ).
  • Safe Working
    • Continuous overload protection with precisely calculated strain gauge load measuring system.
  • Weighing Display
    • Real-time display of the loads via strain gauge sensor
  • Service Optimization
    • Available Alarms for preventive maintenance periods.
    • Tracking of Past Maintenances.
  • Informative Display
    • With its display mounted on hoist, the HoistSense informs the operator and maintenance crew for critical information ( Total runtime, Number of Overloads, Next Service Hour – Dynamic, Remaining SWP%, Number of Starts, Average Load ).
    • Comply with the regulations.
  • Easy to Use
    • HoistSense does not add more buttons or require constantly checking the pushbutton pendant, as the system will start displaying the load on the large display attached to the hoist -easily visible- immediately after the operator starts commanding the crane. And the stored information will be shown on the large display after the hoists stays idle for a short period of time.
  • Stand-alone Application
    • Can be integrated to any of your hoists.